There are recovered_host and telemetered data available for the second half of deployment 2 (2015-01-02T08:00:00 to 2015-04-12T00:00:00), and the same data are not available in the recovered_inst data stream. These data should be available in the recovered_inst data stream (or annotated if there was an issue with internally recording data).

By Lori Garzio, on 3/26/19

Missing data at the end of deployment 8 should be annotated.

By Lori Garzio, on 6/26/19

Values are negative for this deployment. This should be investigated and fixed or annotated.

By Lori Garzio, on 6/26/19

There are 2 data points available for this deployment of this instrument. The dataset should be annotated if there was an issue.

By Lori Garzio, on 6/26/19

Approximately 40% of the data for all variables are negative values for this deployment. Excluding from final data ranges

By Lori Garzio, on 6/26/19

The variable pressure_depth (dbar) is an array of all fill values for every deployment. This should contain valid pressure data.

By Lori Garzio, on 6/26/19

During deployments 2 - 8 and 10, there are 7 - 40 pressure (dbar) data points that are outliers (much deeper than the max deployment depth of 25m).

By Lori Garzio, on 7/1/19

The profiler looks like it got stuck on the bottom - this should be annotated.

By Lori Garzio, on 6/21/19

Suspect values around 30-32 dbar at the end of the data record

By Lori Garzio, on 6/21/19

There is a substantial amount of data outside of global ranges towards the beginning of the deployment (data outside of global ranges removed from plot attached)

By Lori Garzio, on 7/1/19

There is a substantial amount of data outside of global ranges in the middle of the deployment (data outside of global ranges removed from plot attached)

By Lori Garzio, on 7/1/19

estimated_oxygen_saturation is an array of fill values for this deployment.

By Lori Garzio, on 7/1/19

76%-79% of beam_attenuation and optical_absorption data for this deployment are nans, fill values, outside of global ranges, or outliers (+/- 5 SD).

By Lori Garzio, on 6/24/19

75%-77% of beam_attenuation and optical_absorption data for this deployment are nans, fill values, outside of global ranges, or outliers (+/- 5 SD).

By Lori Garzio, on 6/24/19

77%-80% of beam_attenuation and optical_absorption data for this deployment are fill values, outside of global ranges, or outliers (+/- 5 SD).

By Lori Garzio, on 6/24/19

According to Roesler and Barnard (Optical proxy for phytoplankton biomass in the absence of photophysiology: Rethinking the absorption line height, Methods in Oceanography, 2013), “absorption meters are highly prone to biofouling, particularly biofilms which not only attenuate the collimated beam but also impact the scattering properties of the optical surfaces and tubes. In productive coastal waters biofouling can have significant impacts (i.e. 10% of the signal) within one to two weeks”.

By Lori Garzio, on 6/24/19

The file coordinate pressure_depth is an array of all zeros for every deployment. The variable in the file called int_ctd_pressure has what appears to be valid pressure data. The coordinate variable pressure_depth should contain valid pressure data.

By Lori Garzio, on 6/18/19

28% of salinity_corrected_nitrate values are outside of global ranges for this deployment.

By Lori Garzio, on 7/1/19

50% of the nitrate_concentration values for this deployment are outside of global ranges (too high).

By Lori Garzio, on 7/1/19

70% of nitrate_concentration and nutnr_nitrogen_in_nitrate values are negative.

By Lori Garzio, on 7/1/19