No annotations yet.
| Id | Parameter | Display Name | Standard Name | Unit | Fill Value | Precision | Identifier | Type | Level |
|---|---|---|---|---|---|---|---|---|---|
| PD7 | time | Time, UTC | time | seconds since 1900-01-01 | -9999999 | ||||
| PD10 | port_timestamp | Port Timestamp, UTC | seconds since 1900-01-01 | -9999999 | |||||
| PD11 | driver_timestamp | Driver Timestamp, UTC | seconds since 1900-01-01 | -9999999 | |||||
| PD12 | internal_timestamp | Internal Timestamp, UTC | seconds since 1900-01-01 | -9999999 | |||||
| PD16 | preferred_timestamp | Preferred Timestamp | 1 | empty | |||||
| PD863 | ingestion_timestamp | Ingestion Timestamp, UTC | seconds since 1900-01-01 | -9999 | |||||
| PD2935 | header_timestamp | Controller Timestamp | 1 | empty | |||||
| PD2967 | board_type | Controller Board Type, Ex: DCL | 1 | empty | |||||
| PD2968 | vmain_backplane_bus_voltage | Vmain Backplane Bus Voltage @ DCL Input | volts | -9999999 | |||||
| PD2969 | imain_current | Imain, Current, @ DCL Input | ma | -9999999 | |||||
| PD2970 | error_vmain_out_tolerance | Vmain Out of Tolerance | 1 | -99 | |||||
| PD2971 | error_imain_out_tolerance | Imain Out of Tolerance | 1 | -99 | |||||
| PD2972 | error_dcl_iso_swgf_lim_exceeded | DCL_ISO_3V3 SWGF Limit Exceeded | 1 | -99 | |||||
| PD2973 | error_dcl_rtn_swfg_lim_exceeded | DCL_RTN_CPM SWGF Limit Exceeded | 1 | -99 | |||||
| PD2974 | error_vmain_swgf_lim_exceeded | VMAIN SWGF Limit Exceeded | 1 | -99 | |||||
| PD2975 | error_gmain_swgf_lim_exceeded | GNAUB SWGF Limit Exceeded | 1 | -99 | |||||
| PD2976 | error_sensor_iso_swgf_lim_exceeded | SENSOR_ISO_12V/SENSOR_ISO_24V SWGF Limit Exceeded | 1 | -99 | |||||
| PD2977 | error_snsr_com_swgf_lim_exceeded | SNSR_COM SWGF Limit Exceeded | 1 | -99 | |||||
| PD2978 | error_leak_detect_c1_lim_exceeded | Leak-Detect Channel 1 Exceeded Limit | 1 | -99 | |||||
| PD2979 | error_leak_detect_c2_lim_exceeded | Lead-Detect Channel 2 Exceeded Limit | 1 | -99 | |||||
| PD2980 | error_channel_overcurrent_fault | Channel-Pic Overcurrent Fault (Any Active Channel) | 1 | -99 | |||||
| PD2981 | error_channel_1_not_responding | Channel 1 Not Responding | 1 | -99 | |||||
| PD2982 | error_channel_2_not_responding | Channel 2 Not Responding | 1 | -99 | |||||
| PD2983 | error_channel_3_not_responding | Channel 3 Not Responding | 1 | -99 | |||||
| PD2984 | error_channel_4_not_responding | Channel 4 Not Responding | 1 | -99 | |||||
| PD2985 | error_channel_5_not_responding | Channel 5 Not Responding | 1 | -99 | |||||
| PD2986 | error_channel_6_not_responding | Channel 6 Not Responding | 1 | -99 | |||||
| PD2987 | error_channel_7_not_responding | Channel 7 Not Responding | 1 | -99 | |||||
| PD2988 | error_channel_8_not_responding | Channel 8 Not Responding | 1 | -99 | |||||
| PD2989 | error_i2c_error | I2C Error | 1 | -99 | |||||
| PD2990 | error_uart_error | UART Error | 1 | -99 | |||||
| PD2991 | error_brown_out_reset | Brown Out Reset Detected | 1 | -99 | |||||
| PD2992 | bmp085_temp | BMP085 Temperature (Pressure Sensor) | degrees C | -9999999 | |||||
| PD2993 | sht25_temp | SHT25 Temperature (Humidity Sensor) | degrees C | -9999999 | |||||
| PD2994 | murata_12v_temp | 12V Murata Temperature | degrees C | -9999999 | |||||
| PD2995 | murata_24v_temp | 24V Murata Temperature | degrees C | -9999999 | |||||
| PD2996 | vicor_12v_bcm_temp | 12V Vicor BCM Temperature | degrees C | -9999999 | |||||
| PD2997 | sht25_humidity | SHT25 Humidity, %Relative | %relative | -9999999 | |||||
| PD2998 | bmp085_pressure | BMP085 Pressure | psia | -9999999 | |||||
| PD2999 | active_swgf_channels | Active SWGF Channels (Bitmask); '7' = All 3 Enabled | 1 | -99 | |||||
| PD3000 | swgf_c1_max_leakage | SWGF Channel 1 Maximum Leakage | 1 | -9999999 | |||||
| PD3001 | swgf_c2_max_leakage | SWGF Channel 2 Maximum Leakage | 1 | -9999999 | |||||
| PD3002 | swgf_c3_max_leakage | SWGF Channel 3 Maximum Leakage | 1 | -9999999 | |||||
| PD3003 | active_leak_detect_channels | Active Leak-Detect Channels (Bitmask) | 1 | -99 | |||||
| PD3004 | leak_detect_c1_v | Leak-Detect Channel 1 Voltage | volts | -9999999 | |||||
| PD3005 | leak_detect_c2_v | Leak-Detect Channel 2 Voltage | volts | -9999999 | |||||
| PD3006 | channel_state | 8 Element Array of Channel State | 1 | -99 | |||||
| PD3007 | channel_v | 8 Element Array of Channel Voltage | volts | -9999999 | |||||
| PD3008 | channel_i | 8 Element Array of Channel Current | ma | -9999999 | |||||
| PD3009 | channel_error_status | 8 Element Array of Channel Error Status; 0 = OK | 1 | -99 | |||||
| PD3010 | pwr_board_mode | Power Board Mode | 1 | -99 | |||||
| PD3011 | dpb_mode | Dpb Mode | 1 | -99 | |||||
| PD3012 | dpb_voltage_mode | Dpb Voltage Mode | 1 | -99 | |||||
| PD3013 | vmain_dpb_in | Vmain @ DPB Input | volts | -9999999 | |||||
| PD3014 | imain_dpb_in | Imain @ DPB Input | ma | -9999999 | |||||
| PD3015 | out_12v_v | 12V Output Voltage | volts | -9999999 | |||||
| PD3016 | out_12v_i | 12V Output Current | ma | -9999999 | |||||
| PD3017 | out_24v_v | 24V Output Voltage | volts | -9999999 | |||||
| PD3018 | out_24v_i | 24V Output Current | ma | -9999999 |