3-Wavelength Fluorometer
- Reference Designator
- GA05MOAS-PG580-04-FLORTO000
- Review Status
- Review Complete
- Note
- Depth
- 0 to 200m
- Class
- FLORT (3-Wavelength Fluorometer)
- Make / Model
- WET Labs / ECO BB3
Dataset Reviews Last processed: 9/4/19, 7:21 PM
| Dep. | Preferred Method | Stream | DD | FD | SG | EG | Gaps | GD | TS | Rate (s) | Pressure Comp. | Time Order | Valid Data | Missing Data | Data Comp. | Missing Coords. | Review |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | recovered_host | flort_o_glider_data | 4 | 2 | 0 | 0 | 1 | 1 | 10,347 | 1 | 200 / 205 | 1 | 1 | Complete |
Test Notes
- no other streams for comparison
Data Coverage
| Deployment: | 1 |
|---|---|
| flort_o_glider_data | 50% |
Deployment Map
System Annotations Show
| Metadata | Start Date | End Date | Comment |
|---|---|---|---|
|
GA05MOAS-PG580 |
10/31/16, 9:32 PM | 11/1/16, 6:05 PM |
Deployment 1: Short deployment due to a leak that developed near the NUTNR sensor. Glider was recovered after 4 days. Id: 667 By: lgarzio |
Review Notes
| Metadata | Start Date | End Date | Comment |
|---|---|---|---|
|
GA05MOAS |
Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of several segments with consecutive down and up casts for CP05MOAS-GL335-04-DOSTAM000 on 10/26/2015 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue. By Lori Garzio, on 5/31/19  |
||
|
GA05MOAS-PG580-04-FLORTO000 |
There are no global ranges in the system for sci_bb3slo_b470_units, flort_o_bback_b470_total, flort_o_bback_b532_total, sci_bb3slo_b660_units, and flort_o_bback_b660_total. By Lori Garzio, on 9/18/19 |
||
|
GA05MOAS-PG580-04-FLORTO000 |
The arrays for the following variables are all NaNs: sci_bb3slo_b470_units, flort_o_bback_b470_total, flort_o_bback_b532_total, sci_bb3slo_b660_units, flort_o_bback_b660_total. According to the provenance.json (attached), the following cal values are missing: CC_1_dark_counts_volume_scatter, CC_1_scale_factor_volume_scatter, CC_1_measurement_wavelength, CC_2_dark_counts_volume_scatter, CC_2_scale_factor_volume_scatter, CC_2_measurement_wavelength, CC_3_dark_counts_volume_scatter, CC_3_scale_factor_volume_scatter, and CC_3_measurement_wavelength. By Lori Garzio, on 9/18/19 |