CTD
- Reference Designator
- GS05MOAS-GL486-04-CTDGVM000
- Review Status
- Review Complete
- Note
- Depth
- 0 to 1,000m
- Class
- CTDGV (CTD Glider)
- Make / Model
- Sea-Bird / SBE Glider Payload CTD (GP-CTD)
Dataset Reviews Last processed: 1/22/20, 3:18 PM
| Dep. | Preferred Method | Stream | DD | FD | SG | EG | Gaps | GD | TS | Rate (s) | Pressure Comp. | Time Order | Valid Data | Missing Data | Data Comp. | Missing Coords. | Review |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | recovered_host | 303 | 295 | 0 | 7 | 0 | 0 | 3,270,874 | 2 | 1000 / 1008 | 1 | Complete |
Test Notes
- fail: check ['Seawater Pressure', 'Seawater Density']
Data Coverage
| Deployment: | 1 |
|---|---|
| 97% |
Deployment Map
System Annotations Show
| Metadata | Start Date | End Date | Comment |
|---|---|---|---|
|
GS05MOAS-GL486 |
2/21/15, 11:35 AM | 12/12/15, 11:38 AM |
Deployment 1: Glider lost steering and was recovered approximately 80 km north of the array. Id: 754 By: lgarzio |
Review Notes
| Metadata | Start Date | End Date | Comment |
|---|---|---|---|
|
GS05MOAS |
Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of several segments with consecutive down and up casts for CP05MOAS-GL335-04-DOSTAM000 on 10/26/2015 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue. By Lori Garzio, on 5/31/19  |
||
|
GS05MOAS-GL486-04-CTDGVM000 |
Comparison with the shipboard CTD cast was done for R0001. Salinity from the glider was higher than salinity from the CTD cast (the CTD cast was done >6km from the glider location). Further analysis using the shipboard bottle data should be conducted, which is outside the scope of this project. By Lori Garzio, on 3/11/19  |
||
|
GS05MOAS-GL486-04-CTDGVM000 |
99% of sci_seawater_density values are NaNs. Lat and lon are parameters used in the data product algorithm, so I think this got messed up with the re-organization of the glider lat/lon parameters. See Redmine ticket #14486 By Lori Garzio, on 1/24/20  |