Method | Data Stream | Content | Type | |
---|---|---|---|---|
recovered_host | flort_kn_auv_metadata_recovered | Metadata | Report M2M | Engineering |
recovered_host | flort_kn_sample | Data Products | Report M2M Stats | Science |
Metadata | Start Date | End Date | Comment |
---|---|---|---|
CP05MOAS |
Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry. By Lori Garzio, on 5/10/19 |
||
CP05MOAS |
Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of several segments with consecutive down and up casts for CP05MOAS-GL335-04-DOSTAM000 on 10/26/2015 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue. By Lori Garzio, on 5/15/19 |
Metadata | Start Date | End Date | Comment |
---|---|---|---|
CP05MOAS-A6264-01-FLORTN000 |
5/8/15, 6:53 PM |
All deployments: Parameters related to the FLORT are incorrectly labeled as Parameter 0 to Parameter 8 in the system. This issue is under investigation (redmine ticket #13537). While the issue is being resolved please use the following as a mapping for these parameters: Parameter 0 = 700 Ref (Counts); Parameter 1 = 700 Sig (Counts); Parameter 2 = Beta 700 (ug/liter); Parameter 3 = Chl Ref (Counts); Parameter 4 = Chl Sig (Counts); Parameter 5 = Chlorophyll A (ug/liter); Parameter 6 = CDOM Ref (Counts); Parameter 7 = CDOM Sig (Counts); Parameter 8 = CDOM (ppb). Id: 2033 By: cdobson |