Conductivity, salinity, and density drop off suddenly and gradually come back to reasonable values, but never quite reach the values from the beginning of the deployment. Excluding from data summary ranges. Issue should be investigated and annotated in the system.

By Lori Garzio, on 3/28/19

Suspect drop in conductivity.

By Lori Garzio, on 3/28/19

Annotation ID 213: "Due to errors during vendor calibration, a calibration offset (CC_offset) of -111.19 is being applied during the on-demand creation of the L1 Seawater Pressure (dbar) data product from this instrument." - it doesn't look like this offset is actually being applied as the pressure is still 120 dbar deeper than the other deployments and the deployment depth from asset management. This issue needs to be investigated. Excluding from summary data ranges. Annotation ID 25 should be deleted (it's a duplicate of ID 213, but 213 has more info)

By Lori Garzio, on 3/28/19

Dissolved oxygen data are suspect (annotation ID 14). Excluding from data range summary. When a correction is applied this annotation should be updated. Annotation ID 3 is a duplicate and should be deleted.

By Lori Garzio, on 3/28/19

There are no data available for download for deployments 1-4 because the data were delivered via the CTD data stream (Redmine 8662). Now that the DO instrument has been separated from the CTD, the old DO data should be ingested in the DO data stream. Users currently have to go to the collocated CTD reference designator to get the DO data prior to 2018-11-07.

By Lori Garzio, on 8/29/19

The deployment depth from asset management is 2606 but the depth recorded by the instrument is closer to 2656 dbar.

By Lori Garzio, on 6/14/19

Instrument looks like it failed on 5/2/2015. This should be annotated.

By Lori Garzio, on 8/26/19

The .nc files are missing the pressure coordinate.

By Lori Garzio, on 8/26/19

There is a limited amount of data from this profiler available for download. This should be annotated so users are aware of the issues with the deep profilers.

By Lori Garzio, on 5/30/19

There are no deployment depths for this profiler in asset management.

By Lori Garzio, on 5/30/19

There are no data from deployment 2 available for download for any instrument. These data need to be ingested or should be annotated.

By Lori Garzio, on 5/30/19

conductivity_millisiemens (mS cm-1) has the same global ranges in the system as dpc_ctd_seawater_conductivity (S m-1): [0.0, 6.0]. This should be reviewed.

By Lori Garzio, on 5/30/19

Suspect section of 1 profile between 1000-1500 dbar.

By Lori Garzio, on 5/30/19

There are data available in the recovered_wfp stream at the end of the data record that aren't available in the recovered_inst data stream. These recovered_inst data should be available or the dataset should be annotated.

By Lori Garzio, on 5/30/19

No pressure data available in the .nc file (can't make profile or xsection plots). This variable should be a coordinate.

By Lori Garzio, on 5/30/19

There are data available in the recovered_wfp stream at the end of the data record that aren't available in the recovered_inst data stream. These recovered_inst data should be available or the dataset should be annotated.

By Lori Garzio, on 5/30/19

No pressure data available in the .nc file (can't make profile or xsection plots). This variable should be a coordinate.

By Lori Garzio, on 5/30/19

There are data available in the recovered_wfp stream at the end of the data record that aren't available in the recovered_inst data stream. These recovered_inst data should be available or the dataset should be annotated.

By Lori Garzio, on 5/30/19

No pressure data available in the .nc file (can't make profile or xsection plots). This variable should be a coordinate.

By Lori Garzio, on 5/30/19

19 - 58% of the seawater velocity values for deployments 1-4 are NaNs, fill values, outside of global ranges, or outliers (+/- 5SD)

By Lori Garzio, on 12/5/19