| Dep. | Preferred Method | Stream | DD | FD | SG | EG | Gaps | GD | TS | Rate (s) | Pressure Comp. | Time Order | Valid Data | Missing Data | Data Comp. | Missing Coords. | Review |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | recovered_host | 174 | 174 | 0 | 0 | 0 | 0 | 1,711,841 | 7 / | 1 | 2 | 3 | Complete | ||||
| 2 | recovered_host | 223 | 223 | 0 | 0 | 0 | 0 | 2,206,533 | 7 / | 1 | 2 | 3 | Complete | ||||
| 3 | recovered_host | 135 | 60 | 0 | 73 | 3 | 4 | 838,209 | 7 / | 1 | 2 | 3 | Complete | ||||
| 4 | recovered_host | 209 | 209 | 0 | 0 | 0 | 0 | 3,295,307 | 7 / | 1 | 2 | 3 | Complete | ||||
| 5 | recovered_host | 179 | 169 | 0 | 1 | 1 | 9 | 2,619,289 | 7 / | 1 | 2 | 3 | Complete | ||||
| 6 | recovered_host | 177 | 166 | 1 | 0 | 1 | 6 | 2,772,997 | 7 / | 1 | 2 | 3 | Complete | ||||
| 7 | recovered_host | 176 | 147 | 0 | 0 | 3 | 32 | 1,411,848 | 7 / | 1 | 2 | 3 | Complete |
| Deployment: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|---|---|---|---|---|---|---|
| 100% | 100% | 44% | 100% | 94% | 94% | 84% |
| Deployment: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|---|---|---|---|---|---|---|---|
| 1 | 0.00 | ||||||
| 2 | 0.33 | 0.00 | |||||
| 3 | 0.29 | 0.09 | 0.00 | ||||
| 4 | 0.11 | 0.44 | 0.40 | 0.00 | |||
| 5 | 0.28 | 0.09 | 0.01 | 0.39 | 0.00 | ||
| 6 | 0.11 | 0.44 | 0.40 | 0.00 | 0.39 | 0.00 | |
| 7 | 0.29 | 0.09 | 0.00 | 0.40 | 0.01 | 0.40 | 0.00 |
| Metadata | Start Date | End Date | Comment |
|---|---|---|---|
|
CE02SHSM-RID27-01-OPTAAD000 |
4/2/15, 4:15 PM |
Per vendor feedback, the first 1-2 min of each OPTAA instrument sampling period should be considered suspect. Signal drift can occur as the instrument warms up, flushes with seawater, and the filter wheel spins up. Users are encouraged to delete the first minute of data, at a minimum, from each measurement burst and then calculate a median average of the remaining data from the burst before working further with the OPTAA data. Id: 2096 By: wingardc |
|
|
CE02SHSM-RID27-01-OPTAAD000 |
7/15/16, 8:00 PM | 10/3/16, 8:00 PM |
The OPTAA on the CE02SHSM-00003 NSIF has failed. Unit started reporting variable values, including raw counts of 1 for all channels, before stopping completely on 2016-07-18.
Id: 881
By: michaesm
|
|
CE02SHSM-RID27-01-OPTAAD000 |
10/20/19, 1:30 PM |
The OPTAA burst duration was changed from 2 minutes to 4 minutes beginning 2019-10-20T17:30:00 UTC. Id: 1871 By: wingardc |
|
|
CE02SHSM-RID27 Method: telemetered |
11/22/19, 3:45 PM | 1/7/20, 1:30 PM |
Due to reduced power on the mooring (limited recharging of the batteries with light winds and sea lions blocking the solar panels), we have had to reduce the operating schedule of the 7 meter platform. Normally we run the system continuously, but have reduced that schedule to hourly. Id: 1836 By: wingardc |
|
CE02SHSM-RID27 Method: telemetered |
1/13/20, 1:45 PM |
During a large storm event on 2020-01-11, power from the wind turbines was lost. This is the primary means of recharging the battery system on the mooring. With the loss of recharging power, we have had to implement a conservative power model. These systems and instruments have been disabled for the foreseeable future, and no further data will collected from them.
Id: 1903
By: wingardc
|
| Metadata | Start Date | End Date | Comment |
|---|---|---|---|
|
CE02SHSM-RID27-01-OPTAAD000 |
According to Roesler and Barnard (Optical proxy for phytoplankton biomass in the absence of photophysiology: Rethinking the absorption line height, Methods in Oceanography, 2013), “absorption meters are highly prone to biofouling, particularly biofilms which not only attenuate the collimated beam but also impact the scattering properties of the optical surfaces and tubes. In productive coastal waters biofouling can have significant impacts (i.e. 10% of the signal) within one to two weeks”. By Lori Garzio, on 6/28/19 |
||
|
CE02SHSM-RID27-01-OPTAAD000 |
There is no pressure variable in the .nc files. This should be a coordinate. By Lori Garzio, on 6/28/19 |
||
|
CE02SHSM-RID27-01-OPTAAD000 Deployment: 6 |
56% of the optical_absorption values for this deployment are nans, fill values, outside of global ranges, or outliers (+/- 5 SD). By Lori Garzio, on 6/28/19 |