* UPDATED, 2019-01-25: After careful review, the original data product algorithm (pco2_pco2wat) for this sensor was found to contain an error that resulted in calculation of incorrect derived L1 pCO2 values. In consultation with the vendor, the algorithm has been corrected, verified, and uploaded to the OOI system. This update, effective 2019-01-10, applies to all deployments for this sensor. All derived L1
pCO2 data products generated prior to this date should be re-requested in order to ensure utilization of the correct algorithm. The updated algorithm can be viewed at https://github.com/oceanobservatories/ion-functions/blob/master/ion_functions/data/co2_functions.py. * Until further notice, derived L1 pCO2 data products from this sensor are incorrect and should not be used. A significant discrepancy has been uncovered between the pCO2 values from shipboard water samples vs. values calculated by OOI system. The pco2_pco2wat algorithm is under review and can be viewed at https://github.com/ooici/ion-functions/blob/master/ion_functions/data/co2_functions.py. To receive instant notification of updates to the code, add yourself as a watcher to the GitHub repository linked above. For further questions please email help@oceanobservatories.org.

Id: 288 By: friedrich.knuth

Recovered host data are not available.

Id: 497 By: leila

Surface buoy exploded due to hydrogen build-up in well.

Id: 103 By: swhite
Flag: not_operational Exclude: No

Deployment 2: Short deployment due to the fuel cell not functioning correctly. No data expected.

Id: 709 By: cdobson

Data not recoverable.

Id: 508 By: leila

* UPDATED, 2019-01-25: After careful review, the original data product algorithm (pco2_pco2wat) for this sensor was found to contain an error that resulted in calculation of incorrect derived L1 pCO2 values. In consultation with the vendor, the algorithm has been corrected, verified, and uploaded to the OOI system. This update, effective 2019-01-10, applies to all deployments for this sensor. All derived L1
pCO2 data products generated prior to this date should be re-requested in order to ensure utilization of the correct algorithm. The updated algorithm can be viewed at https://github.com/oceanobservatories/ion-functions/blob/master/ion_functions/data/co2_functions.py. * Until further notice, derived L1 pCO2 data products from this sensor are incorrect and should not be used. A significant discrepancy has been uncovered between the pCO2 values from shipboard water samples vs. values calculated by OOI system. The pco2_pco2wat algorithm is under review and can be viewed at https://github.com/ooici/ion-functions/blob/master/ion_functions/data/co2_functions.py. To receive instant notification of updates to the code, add yourself as a watcher to the GitHub repository linked above. For further questions please email help@oceanobservatories.org.

Id: 304 By: friedrich.knuth

Deployment 3: Seafloor Multi-Function Node failed to send data via telemetry.

Id: 571 By: cdobson

Instrument ceased sending sensor records to shore.

Id: 574 By: leila

Multi-function Node was shut down due to low power.

Id: 104 By: lgarzio
Flag: not_operational Exclude: No

Deployment 8: Multi-Function Node was disabled due to shorting in the power.

Id: 336 By: leila
Flag: not_operational Exclude: No

Deployment 9: An unexpected ground fault had occurred. Instruments with batteries will continue to collect data.

Id: 1363 By: leila
Flag: not_operational Exclude: No

Deployment 10: Power to MFN was lost immediately after deployment. There will be no telemetered data for any MFN instruments for this deployment. Most impacted instruments will continue to collect data on battery power and be available as recovered data.

Id: 1562 By: cdobson
Flag: not_operational Exclude: No

Deployment 12: Power issue hinders telemtered data transfer from all MFN instruments. Data from all internally logging instruments will be available on recovery.

Id: 1741 By: cdobson