Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19

Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of several segments with consecutive down and up casts for CP05MOAS-GL335-04-DOSTAM000 on 10/26/2015 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/15/19

99% of the sci_bsipar_par values for deployments 1-4 are outside of global ranges. sci_bsipar_par is the unscaled L0 PAR data product. The global ranges for this parameter are the same as for the scaled L1 PAR data product [0.0, 2500.0]. The global range for sci_bsipar_par should be reviewed.

By Lori Garzio, on 9/5/19

Glider doesn't look like it sampled according to plan. This should be annotated.

By Lori Garzio, on 9/5/19

parad_m_par values are orders of magnitude too low for this deployment. sci_bsipar_par values are reasonable, so the scaling factor should be reviewed.

By Lori Garzio, on 9/5/19

parad_m_par values are orders of magnitude too low for this deployment. sci_bsipar_par values are reasonable, so the scaling factor should be reviewed.

By Lori Garzio, on 9/5/19

50% of the sci_bsipar_par and parad_m_par data for this deployment are outside of global ranges [0.0, 2500.0]. The majority of the values outside of global ranges are slightly negative

By Lori Garzio, on 9/5/19