3-Wavelength Fluorometer
- Reference Designator
- GS05MOAS-PG565-03-FLORTM000
- Review Status
- Review Complete
- Note
- Depth
- 0 to 200m
- Class
- FLORT (3-Wavelength Fluorometer)
- Make / Model
- WET Labs / ECO Puck FLBBCD-SLK
Dataset Reviews Last processed: 1/28/20, 7:21 PM
| Dep. | Preferred Method | Stream | DD | FD | SG | EG | Gaps | GD | TS | Rate (s) | Pressure Comp. | Time Order | Valid Data | Missing Data | Data Comp. | Missing Coords. | Review |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | recovered_host | flort_m_sample | 338 | 315 | 0 | 15 | 4 | 7 | 1,569,509 | 1 | 200 / 211 | 1 | 1 | Complete |
Test Notes
- no other streams for comparison
Data Coverage
| Deployment: | 1 |
|---|---|
| flort_m_sample | 93% |
Deployment Map
System Annotations Show
| Metadata | Start Date | End Date | Comment |
|---|---|---|---|
|
GS05MOAS-PG565 |
12/20/15, 12:56 PM | 11/5/16, 9:02 PM |
Deployment 1: Deployed on 12/20/2015, recovered on 12/25/2015 20:40 UTC for ballast correction and was re-deployed. Starting around 5/1/2016, glider became increasingly difficult to steer. Glider stopped profiling on 11/6/2016 to conserve remaining battery power. At recovery, barnacles were present mostly on the underside of the glider, and were not in an area to hinder flight performance. Id: 577 By: lgarzio |
Review Notes
| Metadata | Start Date | End Date | Comment |
|---|---|---|---|
|
GS05MOAS |
Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of several segments with consecutive down and up casts for CP05MOAS-GL335-04-DOSTAM000 on 10/26/2015 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue. By Lori Garzio, on 5/31/19  |
||
|
GS05MOAS-PG565-03-FLORTM000 |
Comparison with the shipboard CTD cast was done for D0001. Chl-a recorded by the glider was generally comparable to the CTD cast, with the exception of the chl-a maximum (~25 - 50 dbar) and at deeper depths (>100 dbar) where the glider recorded higher chl-a values. Further analysis using the shipboard bottle data should be conducted. This is outside the scope of this project. By Lori Garzio, on 3/11/19  |
||
|
GS05MOAS-PG565-03-FLORTM000 |
Biofouling could be an issue in the second half of the deployment. By Lori Garzio, on 1/29/20  |