metbk_hourly data will not be reviewed because of issues producing the data products have not been resolved - see Redmine tickets 13111, 13113, 13221. Data plots are available in the review images.

By Lori Garzio, on 4/5/19

met_current_speed, met_relwind_speed, met_wind10m, shortwave_irradiance, and met_netsirr global ranges should be reviewed. See review notes for CP01CNSM-SBD11-06-METBKA000 for more details.

By Lori Garzio, on 4/5/19

These variables are missing global ranges for this instrument: stream metbk_hourly - met_buoyfls, met_buoyflx, met_frshflx, met_heatflx, met_latnflx, met_mommflx, met_rainflx, met_sensflx, met_netsirr_hourly. stream metbk_a_dcl_instrument and metbk_a_dcl_instrument_recovered: met_windavg_mag_corr_east, met_windavg_mag_corr_north, met_heatflx_minute, met_latnflx_minute, met_netlirr_minute, met_sensflx_minute.

By Lori Garzio, on 4/5/19

Missing data: met_latnflx_minute, met_windavg_mag_corr_east, met_windavg_mag_corr_north, met_heatflx_minute, met_netlirr_minute, met_relwind_direction, met_relwind_speed, met_salsurf, met_current_direction, met_current_speed for deployments 6 and 7. From the provenance.json file, it appears that various cal coefficients are missing for both deployments: CC_height_of_windspeed_sensor_above_sealevel_m, CC_use_velpt, CC_depth_of_conductivity_and_temperature_measurements_m

Deployment 6 UID: CGINS-METLGR-00038. There is no cal sheet in github
Deployment 7 UID: CGINS-METLGR-00037: There is no cal sheet in github

https://github.com/ooi-integration/asset-management/tree/master/calibration/METBKA

By Lori Garzio, on 4/5/19

eastward_velocity and northward_velocity (from the collocated VELPT) don't have any units or description in the recovered_host-metbk_a_dcl_instrument_recovered METBK .nc file for deployments 3 and 6.

By Lori Garzio, on 4/8/19

The deployment 1 data should be annotated to explain why no recovered_host data are available. According to the ingest csv: "no recovered instrument data"

By Lori Garzio, on 4/5/19

According to annotation ID 1381, no CT data are expected for deployment 1. However, sea_surface_temperature values are recorded at -5, and it looks like other variables are using that temperature in their calculations, which is creating bad data products. Excluding from summary data ranges

By Lori Garzio, on 4/5/19

precipitation is negative at the beginning of the deployment.

By Lori Garzio, on 4/5/19

Surface Current Speeds are substantially higher for this deployment compared to other deployments. This should be investigated.

By Lori Garzio, on 4/8/19

suspect data: met_current_speed

By Lori Garzio, on 4/8/19

recovered_host data are missing for several data products in the middle of deployment 3, but they are available in the telemetered data stream. These recovered_host data should be available.

By Lori Garzio, on 4/8/19

Missing data at the end of the deployment should be annotated.

By Lori Garzio, on 4/8/19