The system is unable to process data after 2015 (annotation ID 1421). When this is fixed the annotation should be updated.

By Lori Garzio, on 10/17/19

pressure (daPa) is an array of fill values for every deployment

By Lori Garzio, on 10/10/19

According to Roesler and Barnard (Optical proxy for phytoplankton biomass in the absence of photophysiology: Rethinking the absorption line height, Methods in Oceanography, 2013), “absorption meters are highly prone to biofouling, particularly biofilms which not only attenuate the collimated beam but also impact the scattering properties of the optical surfaces and tubes. In productive coastal waters biofouling can have significant impacts (i.e. 10% of the signal) within one to two weeks”.

By Lori Garzio, on 10/3/19

Suspect optical_absorption

By Lori Garzio, on 10/3/19

Suspect data: 16% of beam_attenuation and 59% of optical_absorption values are NaNs, fill values, or outside of global ranges for this deployment.

By Lori Garzio, on 10/3/19

optical_absorption, beam_attenutation, wavelength_a and wavelength_c are all arrays of fill values for this deployment. This should be investigated and annotated.

By Lori Garzio, on 10/3/19

Missing data at the end of deployments 2 and 3 should be annotated.

By Lori Garzio, on 10/3/19

There is no pressure variable in any of the .nc files. This should be a coordinate.

By Lori Garzio, on 10/3/19

There are no data available for this deployment for the pco2w_b_sami_data_record stream. This should be investigated and the dataset should be annotated (annotation ID 91 spans some of this time range, but not all and it says the data are suspect, not that they're not available).

By Lori Garzio, on 9/25/19

Annotation ID 91 needs to be updated when the cal value review is complete.

By Lori Garzio, on 9/25/19

3% - 13% of velocity values for all deployments are outside of global ranges.

By Lori Garzio, on 9/25/19

There is no pressure variable in any of the .nc files. This should be a coordinate.

By Lori Garzio, on 9/25/19

72% of vent_fluid_chloride_conc values are NaNs. Values spike at the end of Oct 2015 and stop.

By Lori Garzio, on 9/23/19

72% of vent_fluid_chloride_conc values are NaNs. Values spike in Nov 2016 and stop.

By Lori Garzio, on 9/23/19

vent_fluid_orp values are suspect

By Lori Garzio, on 9/23/19

10% of vent_fluid_orp values are outliers

By Lori Garzio, on 9/23/19

Suspect data for deployment 1 - vent_fluid_temperaure drops off to zero. This should be annotated.

By Lori Garzio, on 9/23/19

There are no global ranges in the system for resistivity_temp_degc, vent_fluid_orp and trhph_thermistor_temp

By Lori Garzio, on 9/23/19

There is no pressure variable in any of the .nc files. This should be a coordinate.

By Lori Garzio, on 9/23/19

99% of the parad_m_par values are outside of global ranges. The scaling factor should be reviewed.

By Lori Garzio, on 9/18/19