Dep. | Preferred Method | Stream | DD | FD | SG | EG | Gaps | GD | TS | Rate (s) | Pressure Comp. | Time Order | Valid Data | Missing Data | Data Comp. | Missing Coords. | Review |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | recovered_host | 80 | 79 | 0 | 0 | 0 | 0 | 2,898,018 | 1 | 200 / 196 | Complete | ||||||
2 | recovered_host | 66 | 61 | 0 | 3 | 1 | 2 | 2,352,654 | 1 | 200 / 197 | Complete | ||||||
3 | recovered_host | 33 | 32 | 0 | 0 | 0 | 0 | 1,092,140 | 1 | 200 / 198 | 1 | Complete | |||||
4 | recovered_host | 84 | 84 | 0 | 0 | 0 | 0 | 3,260,293 | 1 | 200 / 197 | Complete | ||||||
5 | recovered_host | 85 | 85 | 0 | 0 | 0 | 0 | 1,149,129 | 1 | 1000 / 232 | Complete | ||||||
6 | recovered_host | 63 | 61 | 0 | 1 | 1 | 1 | 2,623,333 | 1 | 200 / 203 | Complete | ||||||
7 | recovered_host | 86 | 86 | 0 | 0 | 0 | 0 | 1,097,411 | 1 | 1000 / 238 | Complete |
Deployment: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
---|---|---|---|---|---|---|---|
99% | 92% | 97% | 100% | 100% | 97% | 100% |
Metadata | Start Date | End Date | Comment |
---|---|---|---|
CE05MOAS-GL327 |
12/11/15, 7:00 PM | 12/19/15, 5:00 AM |
Glider leaked on 2015-12-12 and was set to drift until recovery on 2015-12-19. On 2015-12-15, a test dive was performed that resulted in another abort due to a leak, but provided a small addition of data in the recovered set. Id: 1469 By: michaesm |
CE05MOAS-GL327-01-PARADM000 |
3/1/17, 7:00 PM | 3/7/17, 7:00 PM |
Instrument was turned off on 2017-03-02 to prolong battery life to recovery date.
Id: 891
By: michaesm
|
Metadata | Start Date | End Date | Comment |
---|---|---|---|
CE05MOAS |
Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry. By Lori Garzio, on 5/10/19 |
||
CE05MOAS |
Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of 3 consecutive down and up casts for CE05MOAS-GL312-04-DOSTAM000 on 7/8/2014 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue. By Lori Garzio, on 5/14/19 |
||
CE05MOAS-GL327-01-PARADM000 |
99% of the sci_bsipar_par values for deployments 1 and 2 are outside of global ranges. sci_bsipar_par is the unscaled L0 PAR data product. The global ranges for this parameter are the same as for the scaled L1 PAR data product [0.0, 2500.0]. The global range for sci_bsipar_par should be reviewed. By Lori Garzio, on 8/28/19 |
||
CE05MOAS-GL327-01-PARADM000 |
51% - 65% of parad_m_par and sci_bsipar_par values are outside of global ranges for deployments 5 - 7. Zooming in shows the majority of those values are negative. By Lori Garzio, on 8/28/19 |
||
CE05MOAS-GL327-01-PARADM000 Deployment: 3 |
The deployment 3 .nc files are missing coordinates lat, lon, and pressure. By Lori Garzio, on 8/28/19 |