Coastal Glider 327

Reference Designator
CE05MOAS-GL327
Deployment Cruise Start Date Stop Date Mooring Asset Node Asset Sensor Asset Latitude Longitude Deployment Depth Water Depth
1 PS1506A 06/03/2015 08/21/2015 CGVEH-GLDRCE-00327 47.1367 -124.274
2 OC1510A 10/15/2015 12/19/2015 CGVEH-GLDRCE-00327 46.8559 -124.965
3 AT37-03 09/23/2016 10/25/2016 CGVEH-GLDRCE-00327 46.8478 -124.961
4 PS1612 12/15/2016 03/08/2017 CGVEH-GLDRCE-00327 46.9861 -124.559
5 EK-1708A 08/25/2017 11/17/2017 CGVEH-GLDRCE-00327 44.6298 -124.969
6 SKQ201808S 04/01/2018 06/02/2018 CGVEH-GLDRCE-00327 44.661 -124.141
7 EK201807A 07/05/2018 09/28/2018 CGVEH-GLDRCE-00327 44.654 -124.32
8 SU20190125 01/25/2019 04/17/2019 CGVEH-GLDRCE-00327 44.656 -124.601
9 SKQ201921S 10/21/2019 01/11/2020 CGVEH-GLDRCE-00327 44.656 -125.014
Metadata Start Date End Date Comment
CE05MOAS

Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19

CE05MOAS

Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of 3 consecutive down and up casts for CE05MOAS-GL312-04-DOSTAM000 on 7/8/2014 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/14/19

New Note

Metadata Start Date End Date Comment
CE05MOAS-GL327
12/11/15, 7:00 PM 12/19/15, 5:00 AM

Glider leaked on 2015-12-12 and was set to drift until recovery on 2015-12-19. On 2015-12-15, a test dive was performed that resulted in another abort due to a leak, but provided a small addition of data in the recovered set.

Id: 1469 By: michaesm