Velocity Profiler (600kHz)

Reference Designator
Start Depth
End Depth
Current Status
Review Complete
ADCPA (Velocity Profiler (short range) for mobile assets)
Science Discipline
Teledyne RDI
Explorer DVL 600 kHz
M2M Example
Method Data Stream Content Type
recovered_host adcp_bottom_track_config Bottom Track Configuration Data Report M2M Engineering
recovered_host adcp_bottom_track_earth Bottom Track Data Products in Earth Coordinates Report M2M Stats Science
recovered_host adcp_config Configuration Data Report M2M Engineering
recovered_host adcp_engineering Engineering Data Report M2M Engineering
recovered_host adcp_velocity_glider Data Products Report M2M Stats Science
Deployment Cruise Start Date Stop Date Mooring Asset Node Asset Sensor Asset Latitude Longitude Deployment Depth Water Depth
1 Review OC1410A 10/07/2014 12/29/2014 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00320 CGINS-ADCPAM-43105 44.3733 -124.95 1000 1000
2 Review PS1606 06/16/2016 09/27/2016 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00320 CGINS-ADCPAM-43105 44.6449 -124.289 1000 1000
3 Review SKQ201704S 04/10/2017 05/22/2017 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00320 CGINS-ADCPAM-43105 46.98 -124.561 1000 1000
4 Review PS201805A 05/03/2018 08/02/2018 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00320 CGINS-ADCPAM-43105 44.6441 -124.181 1000 1000
5 Review SKQ201921S 10/12/2019 01/17/2020 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00320 CGINS-ADCPAM-42443 46.984 -124.563 1000 1000
Metadata Start Date End Date Comment

Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19


Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of 3 consecutive down and up casts for CE05MOAS-GL312-04-DOSTAM000 on 7/8/2014 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/14/19


The majority (80-85%) of the seawater velocity data for each deployment are NaNs, outside of global ranges, or outliers (+/- 5 SD). See the science variable output for details:

By Lori Garzio, on 8/27/19

Deployment: 4

There are no adcp_velocity_glider data available for this deployment. According to the ingest csv, the raw data files are available. These data should be ingested or annotated to indicate why they are missing.

By Lori Garzio, on 8/27/19

Deployment: 4

The deployment 4 .nc files for this instrument are missing coordinates lat, lon, and pressure.

By Lori Garzio, on 8/27/19

New Note

Metadata Start Date End Date Comment
10/5/14, 8:00 PM 12/28/14, 7:00 PM

Deployment 1 - Power consumption was greater than 1% per day and battery ran down to 10% before the end of the deployment. Glider was drifting before it was recovered.

Id: 890 By: michaesm
Flag: not_operational Exclude: No