Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19

Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of several segments with consecutive down and up casts for CP05MOAS-GL335-04-DOSTAM000 on 10/26/2015 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/15/19

Comparison with the shipboard CTD cast was done for D0002. The available science parameter values and patterns are comparable between the glider and CTD cast, however further analysis using the shipboard bottle data should be conducted. This is outside the scope of this project.

By Lori Garzio, on 3/13/19

The glider looks like it had steering issues. The dataset should be annotated if the glider didn't sample according to plan.

By Lori Garzio, on 5/15/19

Data gaps close to the surface during the second half of the deployment. Dataset should be annotated if there was an issue.

By Lori Garzio, on 5/15/19

Short deployment (15 days) should be annotated.

By Lori Garzio, on 5/15/19

Data are missing for every parameter from the recovered_host data stream for 3 days at the beginning of the deployment. These data are available in the telemetered stream, and should be available in the recovered_host data stream.

By Lori Garzio, on 5/15/19

The glider appeared to stay at the surface for several days at the beginning of deployment 4 - this should be annotated.

By Lori Garzio, on 5/15/19

Suspect profile on/around 1/25/2017.

By Lori Garzio, on 5/15/19