Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19

Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of several segments with consecutive down and up casts for CP05MOAS-GL335-04-DOSTAM000 on 10/26/2015 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/15/19

Comparisons with the shipboard CTD casts were done for D0001, D0002, and R0007. Chl-a recorded by the glider was generally comparable to the CTD cast. Further analysis using the shipboard bottle data should be conducted. This is outside the scope of this project.

By Lori Garzio, on 3/13/19

Glider looks like it drifted at the end of the deployment - this should be annotated

By Lori Garzio, on 9/3/19

Suspect data towards the end of the deployment.

By Lori Garzio, on 9/3/19

Short deployment should be annotated.

By Lori Garzio, on 9/3/19

Values for all parameters are close to zero. This looks similar to CE05MOAS-GL386-02-FLORTM000 deployment 5 where the electrical tape was left on the sensor at deployment (Redmine 12049) - this should be investigated and annotated.

By Lori Garzio, on 9/3/19

Short deployment should be annotated.

By Lori Garzio, on 9/3/19

There are no recovered_host data available for download for this deployment. According to the ingest csv, the raw recovered_host data files are available. These data should be ingested or annotated to indicate why they are missing.

By Lori Garzio, on 9/3/19

Suspect data towards the end of the deployment.

By Lori Garzio, on 9/3/19