Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19

Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of several segments with consecutive down and up casts for CP05MOAS-GL335-04-DOSTAM000 on 10/26/2015 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/15/19

Annotation IDs 1572 and 1573 are duplicates of 1570 and 1571

By Lori Garzio, on 9/4/19

99% of the sci_bsipar_par values for deployments 1 and 3 are outside of global ranges. sci_bsipar_par is the unscaled L0 PAR data product. The global ranges for this parameter are the same as for the scaled L1 PAR data product [0.0, 2500.0]. The global range for sci_bsipar_par should be reviewed.

By Lori Garzio, on 9/4/19

It looks like the sensor failed on 10/17/2014 (the CTD data record goes to 1/4/2015). If that is correct, this should be annotated.

By Lori Garzio, on 9/4/19

Glider looks like it had steering issues - this should be annotated.

By Lori Garzio, on 9/4/19

58% of the parad_m_par data for this deployment are outside of global ranges [0.0, 2500.0]. The majority of the values outside of global ranges are slightly negative

By Lori Garzio, on 9/4/19

Data are available in the telemetered data stream but are not in the recovered data stream from 2017-11-09T01:12:30 to 2017-11-09T08:07:26. These data should be in the recovered stream.

By Lori Garzio, on 9/4/19

Short deployment should be annotated

By Lori Garzio, on 9/4/19