Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19

Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of 3 consecutive down and up casts for CE05MOAS-GL312-04-DOSTAM000 on 7/8/2014 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/14/19

sci_bsipar_par is the unscaled L0 PAR data product. The global ranges for this parameter are the same as for the scaled L1 PAR data product [0.0, 2500.0]. The global range for sci_bsipar_par should be reviewed.

By Lori Garzio, on 5/15/19

58% of the parad_m_par data for deployment 1 are outside of global ranges [0.0, 2500.0]. The majority of the values outside of global ranges are negative (plot zoomed to axis limits [-0.5, 0.5] attached).

By Lori Garzio, on 5/14/19

Glider doesn't look like it sampled according to plan. Dataset should be annotated if there were issues.

By Lori Garzio, on 5/14/19

66% of the parad_m_par data for deployment 2 are outside of global ranges [0.0, 2500.0]. The majority of the values outside of global ranges are negative (plot zoomed to axis limits [-0.5, 0.5] attached).

By Lori Garzio, on 5/14/19

71% of the parad_m_par data for deployment 3 are outside of global ranges [0.0, 2500.0]. The majority of the values outside of global ranges are negative (plot zoomed to axis limits [-0.5, 0.5] attached).

By Lori Garzio, on 5/14/19

69% of the parad_m_par data for deployment 4 are outside of global ranges [0.0, 2500.0]. The majority of the values outside of global ranges are negative (plot zoomed to axis limits [-0.5, 0.5] attached).

By Lori Garzio, on 5/14/19

Short deployment (4 days) should be annotated.

By Lori Garzio, on 5/14/19

44% of the parad_m_par data for deployment 5 are outside of global ranges [0.0, 2500.0]. The majority of the values outside of global ranges are negative (plot zoomed to axis limits [-0.5, 0.5] attached).

By Lori Garzio, on 5/14/19