Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19

Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of 3 consecutive down and up casts for CE05MOAS-GL312-04-DOSTAM000 on 7/8/2014 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/14/19

Deployment 2 was a test deployment - no data available.

By Lori Garzio, on 4/22/19

No data for sci_seawater_density. According to the computed_provenance error:

"missing": [
{
"source": "Stream(761: glider_gps_position)",
"value": "Parameter(1335: m_gps_lat)"
},
{
"source": "Stream(761: glider_gps_position)",
"value": "Parameter(1336: m_gps_lon)"
}

By Lori Garzio, on 4/22/19

The deployment 3 .nc files for every instrument are missing coordinates lat, lon, and pressure.

By Lori Garzio, on 4/25/19

There are several suspect profiles (particularly with conductivity, salinity and density) on 6/18/2016 and 6/23/2016.

By Lori Garzio, on 4/24/19

Glider was out of the water (see annotation ID 888 - fisherman picked it up) - any data available during this time range should be flagged as "bad".

By Lori Garzio, on 4/25/19

There are several suspect profiles (particularly with conductivity, salinity and density) towards the end of the deployment.

By Lori Garzio, on 4/24/19

There are several suspect profiles (particularly with conductivity, salinity and density) towards the middle of the deployment (around 5/13/2018 - 5/15/2018).

By Lori Garzio, on 4/24/19

It looks like the glider started drifting on/around 5/20/2018. Data should be annotated.

By Lori Garzio, on 4/25/19