Photosynthetically Available Radiation

Reference Designator
Start Depth
End Depth
Current Status
Review Complete
PARAD (Photosynthetically Available Radiation)
Science Discipline
Biospherical Instruments
M2M Example
Method Data Stream Content Type
recovered_host parad_m_glider_recovered Data Products Report M2M Stats Science
telemetered parad_m_glider_instrument Data Products Report M2M Stats Science
Deployment Cruise Start Date Stop Date Mooring Asset Node Asset Sensor Asset Latitude Longitude Deployment Depth Water Depth
1 Review OC1503D 04/11/2015 07/08/2015 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00384 CGINS-PARADM-50163 44.3723 -124.934 1000 1000
2 Review OC1508C 08/21/2015 11/22/2015 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00384 CGINS-PARADM-50163 47.0147 -124.446 1000 1000
3 Review TN-342 05/07/2016 07/19/2016 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00384 CGINS-PARADM-50163 46.8562 -124.956 1000 1000
4 Review SKQ201704S 04/20/2017 07/19/2017 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00384 CGINS-PARADM-50243 44.6185 -124.425 1000 1000
5 Review PS1712A 12/08/2017 03/06/2018 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00384 CGINS-PARADM-50243 46.992 -124.567 1000 1000
6 Review OC1905C 05/03/2019 07/25/2019 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00384 CGINS-PARADM-50236 44.635 -124.304 1000 1000
7 Review KP20190808 08/08/2019 10/21/2019 CGVCE-05MOAS-00000 CGVEH-GLDRCE-00384 CGINS-PARADM-50236 44.649 -124.164 1000 1000
Metadata Start Date End Date Comment

Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19


Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of 3 consecutive down and up casts for CE05MOAS-GL312-04-DOSTAM000 on 7/8/2014 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/14/19


99% of the sci_bsipar_par values for deployments 1 and 2 are outside of global ranges. sci_bsipar_par is the unscaled L0 PAR data product. The global ranges for this parameter are the same as for the scaled L1 PAR data product [0.0, 2500.0]. The global range for sci_bsipar_par should be reviewed.

By Lori Garzio, on 8/30/19

New Note

No annotations yet.