Bad altimeter pings are apparent in many deployments of the coastal gliders. A few example plots are attached - m_water_depth plotted as semi-transparent bathymetry.

By Lori Garzio, on 5/10/19

Glider optodes typically exhibit a sensor lag of 20-25 seconds. Example attached of 3 consecutive down and up casts for CE05MOAS-GL312-04-DOSTAM000 on 7/8/2014 showing a typical measurement time lag. Profiles should be analyzed for individual time lags and data should be adjusted. OOI doesn't necessarily need to make the adjustment but users should be aware of the issue.

By Lori Garzio, on 5/14/19

There are telemetered data available for 2015-02-27T19:29:50 to 2015-02-28T03:03:13, but no recovered_host data are available. These data should be available in the recovered_host data stream.

By Lori Garzio, on 5/3/19

Suspect profile on/around 3/1/2015.

By Lori Garzio, on 5/7/19

Suspect data on/around 9/15/2015

By Lori Garzio, on 5/7/19

Data should be annotated to explain why the deployment was so short.

By Lori Garzio, on 5/1/19

Suspect backscatter data at the end of the deployment.

By Lori Garzio, on 5/7/19

This glider looks like it had a sampling change (similar to glider 319, see annotation ID 1371). This dataset should be annotated.

By Lori Garzio, on 5/1/19

Suspect backscatter data near the end of the deployment

By Lori Garzio, on 5/7/19